Rolling Roof Rig, Tank
Top Rollers, Parapet Clamps, Cornice Hooks, Mobile Roof Beams, Ring
Girder Rollers, Lightweight Roof Beams and more. All the features you
want in roof rigging equipment has been engineered into our products.
Obtain an 8 foot outreach with some products. Replace only splice plates
with tubes. Faster and easier installation when you use the new beam
tube instead of splice plates and screws.
1. Telescopic Roof Beams
2. Mobile Roof Beams
3. Type I and Type II Roof Beams
4. Davit and Sockit Systems 5. Rolling Roof Rig – 16’ and
24’ w/cable truss |
|
|
|
|
| |
Counter
Weights (50 lbs. each)
Part
No: 154-17 |
Weight:
50 lbs |
Steel,
non-flowable |
|
|
|
|
|
Longhorns
This
Longhorn features the capability of either a single or double
configuration. By way of the removal of one rod and a couple
of pins, one piece of equipment serves dual purposes.
>Part
No: 154-25 |
Weight:
70 lbs |
Load
Capacity: 1000 lbs. |
|
|
|
|
|
Cornice
Hooks(All Sizes) & Stand Off
Available
in 4 sizes, Cornice hooks are used in conjunction with hanging
rope and tiebacks; are available for application on structurally
sound reinforced parapet walls. Stand-off is to cause hanging
rope to be away from the building’s surface/wall.
Size |
Part
# |
Weight |
9
in. |
149-5 |
21
lbs. |
14
in. |
149-5 |
38
lbs. |
18
in. |
149-24 |
41
lbs. |
22
in. |
149-7 |
54
lbs. |
Load
Capacity: 1000 lbs.
|
Stand
Off: 119-25 - 9 lbs.
|
|
|
|
|
|
Tank Top
Roller
Effective
rigging method for access to petroleum, silo, and other tank
type structures, in conjunction with hanging rope and tiebacks.
Steel rollers have shackles for tieback and to support a
suspended load.
Part
# |
Load
Capacity |
Weight |
154-3 |
1000
lbs |
45
lbs. |
|
|
|
|
Parapet
Clamp
Available
for applications on structurally sound reinforced parapet
walls from 4 3/4 inches to 35 inches thick and up to a 16” outreach.
The clamp’s adjustable outreach makes its versatility
invaluable. The clamp is used in conjunction with hanging
rope and tiebacks when rigging work platforms, cages or chairs.
Part
# |
Weight |
149-71-7 |
56
lbs. |
Load
Capacity: 1500 lbs.
|
Throat
Opening: 27"
|
|
|
|
| |
|
|
Ring Girder
Roller
Similar
to the Tank Top Roller, Ring Girder Rollers are used where
a steel ring girder is located around a storage tank perimeter.
Roller travels on rim of girder. It should be used in conjunction
with hanging rope and tie back.
Part
# |
Weight |
154-10 |
25
lbs. |
Load
Capacity: 1000 lbs.
|
|
|
|
| |
|
|
| Beam Tube Connector |
The
Beam Tube is a sturdy, lightweight aluminum beam tube measures
5” x 5” x 24”. Use Beam Tube for the purpose
of connecting 8 foot beams together with two snap pins, as
a part of your top side rigging.
Part
# |
Weight |
155-19 |
12
lbs. |
Load
Capacity: 1500 lbs.
|
|
|
|
|
|
|
|
| |
|
| Beam Saddle |
| |
|
|
Part
# |
Weight |
154-28 |
12
lbs. |
Load
Capacity: 1000 lbs.
|
|
|
| |
|
|
|
| |
|
|
